Product Positioning
The Plastic-Lined Pipe Design Tool is an automated filling plug-in deeply integrated with PDMS/E3D. For the large amount of tedious, repetitive manual filling of plastic-lined pipes in projects, the software uses intelligent algorithms and a highly customizable “length gradient table” to achieve one-click batch filling with precise control. Tedious, inconsistent and error-prone manual filling is gone; in practice it improves efficiency by more than 80%.
Three intelligent fill modes for complex conditions
The software provides three professional fill modes to meet different design requirements:
- Default mode: fills using standard plastic-lined pipes by gradient only; any remainder that cannot be filled is recorded in the error information automatically.
- Adjustment block mode: after filling with standard pipes, small gaps are filled automatically by inserting an “adjustment block”.
- Non-standard fitting mode: after filling with standard pipes, small gaps are filled by stretching a “non-standard fitting”.
You can also choose whether to 【Include Gaskets】; both filling and clearing apply the gasket logic automatically.

Highly customizable length gradient table
No more messy filling. In 【Length Settings】 you can configure length gradients for each pipe diameter (DN) (such as 3000, 2000, 1000, 90). During one-click filling the plug-in matches from the largest gradient to the smallest, avoiding large numbers of short pipe segments and keeping the model both tidy and consistent with procurement and prefabrication logic.

Accurate error location and one-click cleanup
When a pipe segment is shorter than the minimum gradient and cannot be filled, the system records it automatically in the 【Error Log】 list. Double-click any error record to jump straight to the problem pipe segment in the PDMS/E3D tree for targeted correction. If the design changes, select the corresponding level and click 【Clear Fill】 to wipe out all filled plastic-lined pipes, adjustment blocks and gaskets with one click, restoring the model instantly for a fresh design.

Seamless adaptation to company databases
The software provides out-of-the-box default configuration and also fully supports company-specific databases. In the PDMS/E3D database (Paragon), simply change the Purpose property of plastic-lined pipe FTUB to FTFI, adjustment block PCOM to FTAB and non-standard fittings to NSPF, and the software will recognize and use your internal component library, combining standardized design with automated filling.
